“Water of Life” Single Malt Scotch Whisky

“Whisky and freedom gang ta gither, and Scottish history is much to do with freedom.” wrote Robert Burns. Perhaps that’s a stretch, but Scotch Whisky, even more so than the tartan and kilt, cannot be separated from the heart and soul of Scotland. There are few products which are so closely related to the land of their birth than the single-malt whiskey produced in Scotland.

*Whisky is an English-language word derived from usky. That in turn is an abbreviation of usquebaugh, the word in the Irish and Scottish Gaelic languages for aqua vitae (Latin), or “water of life.”

History

Distillation of whisky has been performed in Scotland for centuries. The earliest written record of whisky production in Scotland from malted barley is an entry on the 1494 Exchequer Rolls, which reads “Eight bolls of malt to Friar John Cor, by order of the King, wherewith to make aqua vitae.”

During the following centuries, the various governments of Scotland began taxing the production of whisky, to the point that most of the spirit was produced illegally. However, in 1823, Parliament passed an act making commercial distillation much more profitable, while imposing punishments on landowners when unlicensed distilleries were found on their properties.

George Smith was the first person to take out a license for a distillery under the new law, founding the Glenlivet Distillery in 1824.

Most distilleries in Scotland are not owned by Scots (Horrors!). The Japanese beverage company Suntory owns Morrison-Bowmore, while other international companies, such as LVMH & Pernod-Ricard (France), and Diageo (England), own the majority of distilleries. The largest distiller to remain under Scottish ownership is William Grant & Sons, owned by the Grant family, with headquarters in Motherwell, Scotland. Other distilleries owned by Scottish companies/families are Glenfarclas, Kilchoman, and Daftmill.

In the 1830s, Aeneas Coffey, a British customs officer, refined a continuous still design which produced whisky much more efficiently than the traditional earlier pot stills, but with much less flavor. Quickly, merchants began blending the malt whisky with the grain whisky distilled in the continuous stills, making the first blended Scotch whisky. The blended Scotch proved quite successful, less expensive to produce than malt with more flavor and character than grain. The combination allowed the single malt producers to expand their operations as the blended whisky was more popular on the international market. As of 2004, over 90% of the single malt Scotch produced is used to make blended Scotch.

The Making

It is an ancient process that’s been refined over centuries, and one in which so many factors must come together to influence the flavor of the final product. It’s not quite alchemy, but the craft of master distillers yields something that

is akin to liquid gold.

There are hundreds of operating distilleries in Scotland, but each one must mature its product in the country for at least three years and one day, using oak casks. Each distillery has its own unique style of character due to ingredients, production techniques and maturation.

Water

There would be no water of life without water. That’s why the site of a distillery is often determined by the discovery of a pure source, like a spring or mountain stream. In addition to forming a large portion of the finished product, water is essential to whisky production. Water encourages the barley to germinate during the malting process, and is added at the mashing stage to extract the sugars and make the wort. Distilleries also need cold water to condense the vapors back into liquid.

Some whiskies also benefit from the addition of a little water in the glass, releasing flavors which might otherwise be masked by notes of peat or brine. The water used in the process must be potable and free from contaminants, high levels of minerals and organic matter. When it comes to production, the distillery needs its water source to be a constant, high-volume supply and – ideally – at a regular temperature for condensing the distilled vapors.

Barley

Cereal grains are the staple ingredients of whisky, because they provide the starch which becomes alcohol. Scotch can be made from wheat, oat, rye, maize or corn, but to be a Single Malt Scotch Whisky the grain must be barley. For generations, barley was grown by the distilleries themselves or on surrounding farmland. In some cases, land-owners built distilleries to create a market for the crops produced by their tenants. Today, whisky is made using barley from all over Scotland, England and Europe.

Barley from Britain is grown mainly on the east coast where the light sandy soils and lower rainfall provide the ideal conditions to produce the high-quality grain suitable for malting – one with a large corn size, and so more of those essential starches. Barley is graded on a scale of one to nine for quality and consistency, and only the top three grades are suitable for malting. Once ripe, the barley is harvested and dried to remove all but 12% of the moisture so it can be stored, but still retain the ability to germinate at the next stage: malting.

Yeast

Yeast is the final ingredient necessary to make malt whisky, although one could say it was just a biological part of the production process, since its role is to convert sugar into alcohol. Up until the 19th century, people didn’t understand exactly what yeast was – whether it was animal, vegetable or mineral. It is in fact a micro-organism related to fungi, and there are countless strains of it floating around in the air just waiting for the right conditions to multiply.

Only a few yeast strains are suitable for fermenting malted barley, and the yeast strain distilleries use to ferment influences the alcohol yield and can influence the flavor. These cells only come to life when the right conditions – warm, wet and with plenty of sugar – are available. When they find the right conditions, yeast cells can double their numbers in a couple of hours. In addition to alcohol, the yeast generates carbon dioxide and other compounds called

congeners. These include higher alcohols which contribute to the final flavor of the malt whisky.

Malting

Malting is the first step in turning barley into whisky, and it begins with steeping. In the field barley will take weeks or even months to begin germinating. By immersing the barley in water three times, with air breaks in between, the grain can be tricked into germinating in a matter of days. The maltster will vary the length of time under water and the duration of the air rests to ensure the optimum germination. After steeping, the barley is cast into large drums where cool, humidified air is blown through it to control the temperature.

Over five days, the barley sprouts, breaking down the cell walls within the gain and producing enzymes which will eventually convert the starch into soluble sugars known as maltose at the mashing stage. These sugars are meant to give the young plant the best start in life, and the maltster’s true skill lies in allowing germination to progress to a point where the cell walls have broken down, but the growing plant has not yet used too much of the starch. To prevent full germination and preserve the sugars, the barley must be heated and dried: this is done through kilning.

In the past, the design of these kilns led to the installation of the distinctive distillery pagoda roof. As the main form of fuel up until the late 19th century, distilleries burned peat or coal in an open kiln to dry their barley and so imparted the salty reek for which many whiskies became famous for. If a distillery wanted unpeated malt, they used a closed kiln. Nowadays, gas is used to produce hot air which dries the grain, and peat smoke is introduced depending on the style of the whisky.

Milling

Malting often takes place at a dedicated maltsters plant, and so the first part of the whisky-making process to take place at the distillery is milling. The malted barley must be dried to around 5% moisture level before milling can begin, or it will clog up the mill. The mill takes the dried malt and uses giant rollers to grind it into a coarse flour called grist.

Grist comprises of husks, larger particles called grits, and fine flour. The grist should have a ratio of around 70% grit, 20% husk and 10% flour. Too fine a flour and could get stuck in the mash tun at the next part of the process. Too coarse and the liquor will drain too fast and not enough sugar will be extracted.

Mashing

The grist is fed into the mash tun and hot water is then added, working with the enzymes from the malting stage to dissolve the sugars. The optimum heat at which the enzymes will break down the starch is known as the “strike point.” Control of this temperature is vital, because if the water is too hot it will kill the enzymes. This process is called mashing and the resulting liquid, not too dissimilar to barley water, is called the wort.

The wort is then drained off through the perforated floor of the mash tun and cooled to between 16 and 20 degrees centigrade ready for the next stage. The remaining barley husks are sent for processing into draff: a by-product which has been used as a nutritious cattle feed for probably as long as man has fermented grain alcohol and kept cattle. Up until this point, no alcohol has been produced – but that changes at the next stage.

Fermentation

The cooled wort is filled in vessels known as wash backs, made usually from larch or pine wood, or more commonly these days, stainless steel. Yeast is added to the cooled wort as it enters the wash back so that fermentation can begin – the yeast cells multiply and turn the mixture into alcohol and carbon dioxide. The mixture is now called wash. As fermentation occurs, the temperature and alcohol level of the wash increases to about 35 degrees centigrade which in turn causes the yeast multiplication to slow down. The final result is a liquid with about eight to nine percent alcohol by volume, and up until this point, the process is fairly similar to brewing beer.

A secondary, bacteria fermentation begins in the wash back, producing lots of complex chemicals. This affects the degree of acidity of the wash, and can influence the character of the final spirit. Another factor is the length of fermentation time: spirit produced from wash that has been fermenting for less than two days is significantly different from wash that has been fermenting for longer. The former has a very specific nutty/spicy character which overrides and masks other characters present.

Distillation

Distillation is the ancient technique of heating a liquid to separate its component substances. To make a Single Malt Scotch Whisky, Scottish distillers must use a pot still made of copper in a process known as batch distillation. To begin with, the wash is heated in a wash still and when it reaches 78°C the alcohol boils and vapor rises into a condenser. The result is a liquid known as ‘low wines’ with a much higher alcohol content – around 23% ABV. This is transferred to a second still called the “low wines” or “spirit” still where the process is repeated to yield a liquid that is around 70% ABV. During this second distillation, the distiller must know when to separate the “middle cut” or “main run” of the spirit from the early “foreshots” and the “feints” or “aftershots,” which contain fewer desirable components.

Each distillery has its own cut point which influences the character of its whisky – as it’s the middle cut of the distillation, known as “new make” or the “heart of the run,” that goes on to mature in oak casks. The shape, size and number of stills and how the distillate is condensed can have an important influence on the flavor and character of the final spirit, because of the liquid’s contact with the copper. Tall stills or stills with a lye pipe which angles upwards allow greater reflux, giving a lighter spirit. Stills with a smaller surface area or a downwards sloping lye pipe tend to produce a heavier spirit.

Maturation

To be a Scotch whisky, the new make spirit must sit in the oak cask in Scotland, for at least three years. Single malts sometimes mature for as long as 70 years. But the process of maturation isn’t really about age; it’s about timing and

wood. Oak is the wood of choice for Scotch because of its intricate chemistry – with cellulose and hemicellulose caramelizing the liquid, adding sweetness and color; lignin which breaks down, giving complexity and vanilla notes; and tannins which add astringency, fragrance and delicacy. The oak wood also aids oxidation, which removes harshness and increases fruitiness.

New oak would impart a dominant woody flavor; fine for new world chardonnays, but not for Scotch whisky. So, the majority of Scotch whisky is matured in second-hand casks from Kentucky. American Oak ex-bourbon casks impart more sweet vanilla and coconut notes and a lighter color; ex-wine or Sherry casks of European oak bring rich flavor and darker color, although due to the good availability most Sherry casks are nowadays made of American oak.

All casks are charred before use, breaking down the lignin and helping to remove undesirable flavors. The ratio of spirit volume to cask surface also plays its part: Butts are 500 bulk liters, Hogsheads 250 bulk liters, and American Standard Barrels 200 bulk liters.

A Single Malt Scotch Whisky can spend time in more than one cask, in a process known as finishing. The craft of the Master Blender lies in understanding how to combine all of these factors with time, and so enable each whisky reach its full potential.

“They say some of my stars drink whiskey.  But I have found that the ones who drink milkshakes don’t win many ball games.” — Casey Stengel

“Always carry a flagon of whiskey in case of snakebite.  Furthermore, always carry a small snake.” — W C Fields

*Researched by Donald Erwin. All content collected from non-copyrighted advertising material.